Lubricants for earth-moving machinery, lifting equipment and greases for the cement industry   Download catalog

TermoMax

It is especially-resistant plastic grease with high operating features for mechanisms operating in heavy conditions and arctic temperatures. The TermoMax is produced on the basis of mineral and synthetic basic oils of low viscosity and complex lithium base. These series greases contain a set of additives, including high-efficiency extreme pressure (ЕР) additives. Molybdenum disulfide is introduced into the composition to increase its bearing capacity.

Working temperature -30..+180

  • Type of packaging
Cartridge 0,4 kg
Bucket 18 kg
Barrel

The TermoMax has good load and high-temperature features. It is operable at a temperature to 150ºС. It withstands a short-time heating to 180ºС. The grease ensures reliable protection of parts to be lubricated at specific critical loads, corrosion and premature failure protection. It has perfect adhesion to any metal surfaces and high mechanical stability. The product withstands the effect of cold and hot water, gives a good account during operation in dusty conditions.

The TermoMax is intended for mechanisms, operating at critical and impact loads, with water contact, in conditions of dustiness and vibrations. These series greases are used for lubricating hinges, pin-pivot connections of transport, mining and construction machinery. The TermoMax with ЕР0 and ЕР00 consistence can be used in centralized lubrication systems, including in arctic conditions.

Introduction experience

Characteristic

Method

EP00

EP0

EP1

EP2

Base

-

Li-Complex

MoS2 content, %

-

5

Operating temperature range, ºС

-

-30..+180

-30..+180

-30..+180

-30..+180

Grease classification

DIN 51502

OGPF00R-30

OGPF0R-30

KPF1R-30

KPF2R-30

Grease color

Visually

Dark-grey

NLGI consistency index

DIN 51 818

00

0

1

2

0.1 mm penetration

DIN ISO 2137

400-430

355-385

310-340

265-295

Basic oil viscosity at 40ºС, mm2/s

DIN 51562-1

150

150

150

150

Drop point, ºС

DIN ISO 2176

-

-

260

260

Welding load, N

DIN 51350

4900

4900

4900

4900

 

SEE ALSO

TermoLit HD
TermoLit HD

Li-Complex Grease EP1, EP2, EP3

Read more
TermoLub HD
TermoLub HD

Multipurpose Calcium Complex Grease EP0, EP1, EP2

Read more
TermoMax
TermoMax

Li-Complex Grease EP00, EP0, EP1, EP2

Read more
TermoSint 100
TermoSint 100

Synthetic Li-Complex Grease EP2

Read more
Elit-X
Elit-X

Li-Complex Grease EP00, EP0, EP1, EP2, EP3

Read more
ElitCa 1000MG EP2
ElitCa 1000MG EP2

Li-Ca Grease EP2 -10°C to +120°C

Read more
Elit-M
Elit-M

Li Grease EP0, EP1, EP2 Contain molybdenum disulfide

Read more
TermoLit-3000
TermoLit-3000

Li-Complex Grease EP00, EP1, EP2, EP3

Read more
TermoSil-1
TermoSil-1

Special High Temperature Paste

Read more
TermoBent 460M
TermoBent 460M

Bentonite Grease EP1, EP2

Read more
TermoBentX 100
TermoBentX 100

Bentonite Grease EP1, EP2

Read more
Burolit-CU
Burolit-CU

Bentonite grease -40…+1100

Read more
Яндекс.Метрика
Contact form

Заказать TermoMax