ORDER

TermoPlex 1500 OG

	THE THICKENER - ALUMINUM COMPLEX gives the grease operability in the presence of seawater, a high degree of protection against oxidation and corrosion, 100% protection from dust and dirt, resistance to thermal, structural and oxidative destruction, colloidal stability
	THERMAL REVERSIBILITY The properties of the lubricant are fully restored after repeated overcoming of the drop-off temperature and subsequent cooling
	WATER RESISTANCE is not washed off by a hot water jet (loss of less than 3% at 79 ° C), is not afraid of seawater
	MOLYBDENUM DISULFIDE AND GRAPHITE IN the COMPOSITION provide protection when using an insufficient amount of lubricant, in conditions of severe contamination and at extremely high loads
	HIGH ADHESION prevents the grease from draining off the surfaces, keeps the grease in the lubrication zones for a long time

• smoothes roughness and increases contact area
• complies with the requirements of the following specifications: P&H 520 Ver 00, 03-97; P&H 464 Ver 09, 04-93 ; CAT Service Advisory SA 11-005 SD 4713

• forms a sticky and extremely waterproof film
• prevents the lubricant from being squeezed out of the work area

Operating temperature range от -10 до +160 ⁰С

Product application


splined connections	open gear mechanisms	threaded connections

It is recommended for use in case of slight damage to the friction surface, also for open gears of dragliners, shovels of excavators, stackers and mills, pivoting roller devices, low-speed heavy-loaded anti-friction bearings, high-loaded friction units of mining, cement, metallurgical, etc. equipment.

Ingredients

Mineral oil, thickener aluminum complex, molybdenum disulfide, graphite, extreme pressure (EP), anti-wear (AW), antioxidant and anticorrosive additives

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic	EP000	EP00	EP0
Base	Aluminium Complex
Operating temperature range, ºС	-10..+160	-10..+160	0..+160
Operating temperature of the solid lubricating film, ⁰С	+250	+250	+250
Grease color	Dark-grey
NLGI consistency index	000	00	0
0.1 mm penetration	445-475	400-430	355-385
Grease Classification	OGF000P-10	OGF00P-10	OGF0P-0
Basic oil viscosity at 40ºС, mm²/s	1500	1500	1500
Drop point, ºС	-	-	-
Welding load, N, not less	7350	7350	7350

--!>

FOUND OUT MORE

TermoSint 220

All-season, multifunctional synthetic grease of long service life, operating temperature from -40⁰C to +150⁰C

Chisel Paste

Highly effective ARGO Chisel Paste for hydraulic hammers up to 880 kg

TermoPlex 460 PTFE

Grease for telescopic systems. Operating temperature range from -20 to +160 ⁰C.

TermoLub S460PM

Grease for paper-making machines operating at extremely high temperatures up to + 200 °C and significant waterlogging. The operating temperature range is -40...+200 °C