TermoSint 1500
TermoSint 1500 grease is recommended for lubrication of heavily loaded bearings of various equipment operating at low and ultra-low speeds in conditions of boundary friction and high temperatures. The most typical example of the use of lubricants in this series is the lubrication of heavily loaded bearings of rotating furnaces.
TermoSint 1500 grease can be used in centralized lubrication systems. Lubricants of this series are especially recommended in cases when conventional lubricants do not perform complex operational tasks, and a long service interval is also required.
Operating temperature range -20..+180ºС
Product application
 |
 |
 |
| heavily loaded bearings |
high temperatures |
centralized lubrication system |
It is recommended for lubrication of heavy-loaded bearings of various equipment operating at low and ultra-low speeds in conditions of boundary friction and high temperatures. The most typical example of the use of lubricants in this series is the lubrication of heavily loaded bearings of rotating furnaces.
TermoSint 1500 EP 1.5 can be used in centralized lubrication systems.
Ingredients
Synthetic oil (PAO), lithium complex thickener, extreme pressure (EP), antioxidant and anticorrosive additives
Type of packaging
Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg
Environment protection and safety
The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.
| Characteristic | TermoSint 1500 |
| NLGI consistency index | 1,5 |
| Base | Li-Complex |
| Basic oil | Synthetic (PAO) |
| Basic oil viscosity at 40ºС, mm2/s | 1500 |
| Operating temperature range, ºС | -20…+180 |
| Grease classification | KPHC1-2R-20 |
| Grease color | Red |
| 0.1 mm penetration | 290-320 |
| Drop point, ºС | 265 |
| Welding load, N | 2607 |
FOUND OUT MORE
TermoMax
Heat-resistant grease with molybdenum disulfide. Operating temperature from -30°C...+160°C
TermoLub S460
Grease for equipment operating under significant waterlogging, high mechanical loads and temperatures up to +180 ° C.
TermoSint 1500
High-temperature grease with a drop-off temperature of +265ºC. Operating temperature from -20 °C...+180 °C
TermoLub S220
High temperature grease for gearboxes with leakage problems. Operating temperature from -20 °C...+180 °C
TermoPlex 50 PTFE
Winter lubricant for telescopic mechanisms. temperature range from -45 to +160 ⁰C.
TermoPlex 500 OG
All-season grease for open gears. The operating temperature range is from -25 to +160СC.
Elit Moly
Multifunctional lubricant with molybdenum disulfide Operating temperature from - 30°C...+140°C
TermoSint 220
All-season, multifunctional synthetic grease of long service life, operating temperature from -40⁰C to +150⁰C
TermoLub S Copper
Specialized paste for pneumatic and hydraulic hammers, withstands critical loads and temperatures up to + 1100 ⁰C.
TermoPlex 1000 OG
Water-resistant lubricant for open gears,. The operating temperature range is from -10 to +160⁰C.
